[Keyboard] Adding Styrka Topre PCB (#21276)

keyboards/viktus/styrka_topre/readme.md

@@ -0,0 +1,27 @@
+# Styrka - Topre
+
+![Styrka - Topre](https://i.imgur.com/ZQzkL4hh.png)
+
+A topre PCB for the Viktus Styrka
+
+-   Keyboard Maintainer: BlindAssassin111
+-   Hardware Supported: Styrka Topre PCB
+-   Hardware Availability: Viktus Design LLC
+
+Make example for this keyboard (after setting up your build environment):
+
+    make viktus/styrka_topre:default
+
+Flashing example for this keyboard:
+
+    make viktus/styrka_topre:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available