dax/qmk
1
0
Fork 0
Code Issues Pull Requests Actions 2 Packages Projects Releases Wiki Activity

Refactor Galatea (#20011)

Browse Source
This commit is contained in:
studiokestra
2023-04-02 23:37:43 -06:00
committed by GitHub
parent 8a5e8ed88e
commit f3f0bf6dbe
24 changed files with 429 additions and 1094 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
keyboards/studiokestra/galatea/readme.md
View File

@@ -1,27 +1,29 @@
# Galatea
# studiokestra/galatea
![studiokestra/galatea](https://i.imgur.com/juPhV1xh.png)
TKL H87/88c compatible PCB with support for the most common layouts.
* Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
* Hardware Supported: [studiokestra.ca/galatea](https://studiokestra.ca/galatea/)
* Hardware Availability: In-Stock Sale (Dec 2021)
* Hardware Supported: Most H87C compatible keyboards
* Hardware Availability: https://RNDKBD.com; https://geon.works/
* Rev1 firmware is used for Galatea PCBs with no RGB underglow.
* Rev2 firmware is used for Galatea PCBs with RGB underglow.
## Bootload Sequence
There are 3 ways to put the board in bootloader mode:
- Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
- With the default layout, toggle Layer 1 and press the `R` key.
## Compiling Firmware
* Rev2 firmware is used for Galatea PCBs with RGB underglow.
Make example for this keyboard (after setting up your build environment):
make studiokestra/galatea/rev1:default
If no revision is specified, it will build rev1 firmware by default.
Flashing example for this keyboard:
make studiokestra/galatea/rev1:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available