dax/qmk
1
0
Fork 0
Code Issues Pull Requests Actions 2 Packages Projects Releases Wiki Activity

Meridian LED update (#15329)

Browse Source 
* Meridian first update

* Update README, adjust timing settings

* Update README
This commit is contained in:
Álvaro A. Volpato
2021-11-28 03:26:50 -03:00
committed by GitHub
parent 99c6829bf0
commit d4690d0c23
6 changed files with 123 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
keyboards/primekb/meridian/readme.md
View File

@@ -5,8 +5,28 @@
* Keyboard Maintainer: [Holten Campbell](https://github.com/holtenc)
* Hardware Supported: STM32F072CBT6
Make example for this keyboard (after setting up your build environment):
## Compiling firmware and flashing
make primekb/meridian:default
### Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
* **Physical reset button**: press the button on the bottom of the PCB; or
* **Keycode in layout**: press the key mapped to `RESET` if it is available (Escape key on layer 1 in the default layout).
### Compile firmware
The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using
make primekb/meridian/ws1812:default
make primekb/meridian/ktr1010:default
After compiling, enter bootloader in the PCB and flash the firmware using `dfu-util` or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use
make primekb/meridian/ws1812:default:flash
make primekb/meridian/ktr1010:default:flash
VIA-supported firmwares are also available.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).