[Keyboard] Add Kudox Full (#15256)

* Add Kudox Full keyboard

* Add keyboards/kudox_full SPDX identifier

* Modify rule.mk of keyboards/kudox_full

* Remove html code from README of keyboards/kudox_full

* Modify readme of keyboards/kudox_full

* rev1.c includes rev1.h - kudox-full/rev1

* Move to <keyboard>.c oled_task_user and eeconfig_init_user

* Move post_config.h MOUSEKEY_*

* Change BOOTMAGIC_ENABLE no kudox_full

* Modify the obsoleted codes

* Modify eeconfig_init_kb from eeconfig_init_user

* Set none as default, but values

* Add about the bootloader on kudox_full/readme

* Modify the comments in keyboards/kudox_full/rules.mk

keyboards/kudox_full/rev1/config.h

@@ -0,0 +1,77 @@
+// Copyright 2021 Kumao Kobo (@kumaokobo)
+// SPDX-License-Identifier: GPL-2.0+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xABBA
+#define PRODUCT_ID      0x9693
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Kumao Kobo
+#define PRODUCT         The Kudox Full Keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 9
+
+// wiring of each half
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D4 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5} //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#undef RGBLED_NUM
+#define RGBLED_NUM 14    // Number of LEDs
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION