[Keyboard] Add Support to Ducky One2 SF (#17260)

keyboards/ducky/one2sf/1967st/boards/NUC123SD4AN0/board.c

@@ -0,0 +1,57 @@
+/*
+    ChibiOS Driver element - Copyright (C) 2019 /u/KeepItUnder
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#    if NUC123_HAS_GPIOA
+    {VAL_GPIOA_PMD, VAL_GPIOA_OFFD, VAL_GPIOA_DMASK, VAL_GPIOA_DBEN, VAL_GPIOA_IMD, VAL_GPIOA_IEN, VAL_GPIOA_ISRC, VAL_GPIOA_DOUT},
+#    endif
+#    if NUC123_HAS_GPIOB
+    {VAL_GPIOB_PMD, VAL_GPIOB_OFFD, VAL_GPIOB_DMASK, VAL_GPIOB_DBEN, VAL_GPIOB_IMD, VAL_GPIOB_IEN, VAL_GPIOB_ISRC, VAL_GPIOB_DOUT},
+#    endif
+#    if NUC123_HAS_GPIOC
+    {VAL_GPIOC_PMD, VAL_GPIOC_OFFD, VAL_GPIOC_DMASK, VAL_GPIOC_DBEN, VAL_GPIOC_IMD, VAL_GPIOC_IEN, VAL_GPIOC_ISRC, VAL_GPIOC_DOUT},
+#    endif
+#    if NUC123_HAS_GPIOD
+    {VAL_GPIOD_PMD, VAL_GPIOD_OFFD, VAL_GPIOD_DMASK, VAL_GPIOD_DBEN, VAL_GPIOD_IMD, VAL_GPIOD_IEN, VAL_GPIOD_ISRC, VAL_GPIOD_DOUT},
+#    endif
+#    if NUC123_HAS_GPIOF
+    {VAL_GPIOF_PMD, VAL_GPIOF_OFFD, VAL_GPIOF_DMASK, VAL_GPIOF_DBEN, VAL_GPIOF_IMD, VAL_GPIOF_IEN, VAL_GPIOF_ISRC, VAL_GPIOF_DOUT},
+#    endif
+};
+#endif
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+    NUC123_clock_init();
+}
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {}