[Keyboard] Add Studio Kestra Nue PCB (#12094)

keyboards/studiokestra/nue/readme.md

@@ -0,0 +1,23 @@
+# Nue
+
+60% PCB with gasket mounting tabs designed for the Nue keyboard.
+
+* Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
+* Hardware Supported: [studiokestra.ca/nue](https://studiokestra.ca/nue/)
+* Hardware Availability: Group-Buy (Q1 2021)
+
+## Bootload Sequence
+
+There are 3 ways to put the board in bootloader mode:
+
+- Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
+- With the default layout, toggle Layer 1 and press the `R` key. 
+
+## Compiling Firmware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make studiokestra/nue:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).