[Keyboard] Add new keyboard "QooLee" (#14977)

Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/takashicompany/qoolee/readme.md

@@ -0,0 +1,30 @@
+# qoolee
+
+![qoolee](https://github.com/takashicompany/qoolee/raw/master/images/qmk.jpg?raw=true)
+
+QooLee is a keyboard with a 30% layout with ISO Enter.
+It can also be equipped with a rotary encoder.
+It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs.
+VIA (Remap) firmware is also available.
+
+* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
+* Hardware Supported: PCB, Pro Micro
+* Hardware Availability: https://github.com/takashicompany/qoolee
+
+Make example for this keyboard (after setting up your build environment):
+
+    make takashicomoany/qoolee:default
+
+Flashing example for this keyboard:
+
+    make takashicompany/qoolee:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available