[Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893)

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Don Kjer <don.kjer@gmail.com>

keyboards/durgod/dgk6x/config.h

@@ -0,0 +1,93 @@
+/* Copyright 2021 Jessica Sullivan and Don Kjer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xD60D
+#define MANUFACTURER    Hoksi Technology
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+// Dynamic EEPROM
+// Something sensible or else VIA may crash
+// Users may enable more if they wish
+#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR  4095
+
+// Increase VIA layer count
+#define DYNAMIC_KEYMAP_LAYER_COUNT 16
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Bootmagic Lite key configuration */
+#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#define BOOTMAGIC_LITE_ROW                 0
+#define BOOTMAGIC_LITE_COLUMN              0
+
+/* LED indicator pins */
+#define LED_CAPS_LOCK_PIN   C4
+#define LED_WIN_LOCK_PIN    C5
+#define LED_SCROLL_LOCK_PIN A8
+#define LED_MR_LOCK_PIN     LED_SCROLL_LOCK_PIN
+#define LED_PIN_ON_STATE    0
+
+#ifdef RGB_MATRIX_ENABLE
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010011
+
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+
+/* I2C Alternate function settings */
+#define I2C1_SCL_PAL_MODE 1
+#define I2C1_SDA_PAL_MODE 1
+
+/* Set I2C speed to 400kHz, 300ns Tr, 14ns Tf */
+#define I2C1_TIMINGR_PRESC   0x1U
+#define I2C1_TIMINGR_SCLDEL  0x9U
+#define I2C1_TIMINGR_SDADEL  0x0U
+#define I2C1_TIMINGR_SCLH   0x0cU
+#define I2C1_TIMINGR_SCLL   0x22U
+
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_LED_PROCESS_LIMIT 4
+#define RGB_MATRIX_LED_FLUSH_LIMIT 26
+
+#define DISABLE_RGB_MATRIX_HUE_BREATHING
+#define DISABLE_RGB_MATRIX_HUE_PENDULUM
+#define DISABLE_RGB_MATRIX_HUE_WAVE
+
+// This allows VIA to control RGB Matrix settings in the 'Lighting' section.
+#define VIA_QMK_RGBLIGHT_ENABLE
+
+#endif /* RGB_MATRIX_ENABLE */