dax/qmk
1
0
Fork 0
Code Issues Pull Requests Actions 2 Packages Projects Releases Wiki Activity

Iron180 LED fix (#15411)

Browse Source
This commit is contained in:
Álvaro A. Volpato
2021-12-07 11:48:12 -03:00
committed by GitHub
parent 554cc86aeb
commit 28e92536d4
8 changed files with 31 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
keyboards/iron180/readme.md
View File

@@ -1,4 +1,6 @@
# Iron180 QMK folder
# Iron180 QMK firmware folder
![iron180](https://i.imgur.com/zHcZoxa.png)
## Introduction
@@ -6,13 +8,26 @@ This is the QMK Firmware repository for the Iron180 PCB, a keyboard designed by
The Iron180 PCB is a F13 TKL PCB with ALPS switches support. It also supports in-switch single-color LEDs and a multi-layout design for default or 7U bottom row, ISO layout, split backspace and right shift.
As of November 2020, the only way to obtain an Iron180 was through the [Group Buy](https://geekhack.org/index.php?topic=109513) which is already over and all spots were filled.
As of november 2021, the Group Buy of Iron180 is already over and extras were not sold yet. See the [GB page](https://geekhack.org/index.php?topic=109513) for more information.
## How to compile
## How to flash
After setting up your build environment, you can compile the Iron180 default keymap by using:
### Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard with the key pressed;
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESCAPE key in layer 1 of the default layout);
## Compile firmware and flash
To build the default layout for this keyboard (after setting up your build environment), use:
make iron180:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Then, after accessing the DFU state, use a tool like `dfu-util` or the QMK Toolbox to download that firmware into your PCB. To directly compile-and-flash the PCB after it is put into a DFU state, use
make iron180:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).