[Keyboard] Add Winry315 keyboard (#15894)
This commit is contained in:
138
keyboards/winry/winry315/config.h
Normal file
138
keyboards/winry/winry315/config.h
Normal file
@@ -0,0 +1,138 @@
|
||||
// Copyright 2022 Sergey Vlasov (@sigprof)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
// Key matrix size.
|
||||
#define MATRIX_ROWS 1
|
||||
#define MATRIX_COLS 24
|
||||
|
||||
// Key pins (including encoder press switches).
|
||||
// The NO_PIN entries are reserved for encoder rotation mappings.
|
||||
#define DIRECT_PINS \
|
||||
{ \
|
||||
{ F4, C7, D4, D5, D1, F5, C6, D6, D3, D2, F6, B6, D7, B4, B5, B2, D0, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \
|
||||
}
|
||||
|
||||
// clang-format off
|
||||
|
||||
// Encoder pins.
|
||||
// Encoder numbering (assuming the default board orientation with encoders on
|
||||
// the top side):
|
||||
// 0 - left
|
||||
// 1 - center (with a longer shaft and a larger knob)
|
||||
// 2 - right
|
||||
#define ENCODERS_PAD_A { F1, B0, B3 }
|
||||
#define ENCODERS_PAD_B { F0, B1, B7 }
|
||||
#define ENCODER_RESOLUTION 4
|
||||
|
||||
// Encoder mappings (used for VIA).
|
||||
#define ENCODERS 3
|
||||
#define ENCODERS_CW_KEY { { 22, 0 }, { 18, 0 }, { 20, 0 } }
|
||||
#define ENCODERS_CCW_KEY { { 23, 0 }, { 19, 0 }, { 21, 0 } }
|
||||
|
||||
// clang-format on
|
||||
|
||||
// RGB LED parameters.
|
||||
// This PCB uses a single chain of WS2812-compatible addressable RGB LEDs for
|
||||
// per-key backlight and underglow.
|
||||
#define RGB_DI_PIN F7
|
||||
#define RGBLED_NUM 27
|
||||
#define RGBLIGHT_LIMIT_VAL 150
|
||||
|
||||
// RGB Lighting configuration. This mode is used by the vendor firmware, and
|
||||
// can be chosen if the full RGB Matrix support is not desired for some reason.
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# define RGBLIGHT_HUE_STEP 8
|
||||
# define RGBLIGHT_SAT_STEP 8
|
||||
# define RGBLIGHT_VAL_STEP 8
|
||||
# define RGBLIGHT_SLEEP
|
||||
# define RGBLIGHT_EFFECT_BREATHING
|
||||
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
# define RGBLIGHT_EFFECT_SNAKE
|
||||
# define RGBLIGHT_EFFECT_KNIGHT
|
||||
# define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
# define RGBLIGHT_EFFECT_RGB_TEST
|
||||
# define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#endif
|
||||
|
||||
// RGB Matrix configuration.
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
# define DRIVER_LED_TOTAL RGBLED_NUM
|
||||
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL
|
||||
|
||||
# define RGB_MATRIX_CENTER \
|
||||
{ 35, 35 }
|
||||
|
||||
# define RGB_DISABLE_WHEN_USB_SUSPENDED
|
||||
|
||||
// This option is required for the TYPING_HEATMAP and DIGITAL_RAIN effects,
|
||||
// both of which are disabled below, so the common support for those effects is
|
||||
// disabled too.
|
||||
# undef RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
|
||||
// This option is required for reactive effects; disabling this option will
|
||||
// implicitly disable all of them.
|
||||
# define RGB_MATRIX_KEYPRESSES
|
||||
|
||||
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_BREATHING
|
||||
# define ENABLE_RGB_MATRIX_BAND_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_ALL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
||||
# define ENABLE_RGB_MATRIX_DUAL_BEACON
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
||||
# define ENABLE_RGB_MATRIX_RAINDROPS
|
||||
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
||||
# define ENABLE_RGB_MATRIX_HUE_BREATHING
|
||||
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
||||
# define ENABLE_RGB_MATRIX_HUE_WAVE
|
||||
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
|
||||
// The PIXEL_FRACTAL effect does not work properly when the matrix layout is
|
||||
// different from the physical layout; it also has problems when underglow
|
||||
// LEDs are present, or when multiple LEDs are associated with the same key.
|
||||
# undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
|
||||
|
||||
// Framebuffer effects; can be enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
// is defined. Both of these effects currently don't work properly when the
|
||||
// key matrix does not match the physical layout, so they are disabled.
|
||||
# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
||||
# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
||||
|
||||
// Reactive effects; can be enabled only if at least one of
|
||||
// RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined.
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
||||
# define ENABLE_RGB_MATRIX_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_MULTISPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
||||
|
||||
#endif
|
||||
|
||||
// Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed.
|
||||
#define DEBOUNCE 5
|
||||
Reference in New Issue
Block a user