qmk/platforms/arm_atsam/bootloaders/md_boot.c

/* Copyright 2017 Fred Sundvik
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "bootloader.h"

#include "samd51j18a.h"

// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
extern uint32_t _eram;
#define BOOTLOADER_MAGIC 0x3B9ACA00
#define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4)

// CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method.
void bootloader_jump(void) {
#ifdef KEYBOARD_massdrop_ctrl
    uint8_t  ver_ram_method[] = "v2.18Jun 22 2018 17:28:08"; // The version to match (NULL terminated by compiler)
    uint8_t *ver_check        = ver_ram_method;              // Pointer to version match string for traversal
    uint8_t *ver_rom          = (uint8_t *)0x21A0;           // Pointer to address in ROM where this specific bootloader version would exist

    while (*ver_check && *ver_rom == *ver_check) { // While there are check version characters to match and bootloader's version matches check's version
        ver_check++;                               // Move check version pointer to next character
        ver_rom++;                                 // Move ROM version pointer to next character
    }

    if (!*ver_check) {                  // If check version pointer is NULL, all characters have matched
        *MAGIC_ADDR = BOOTLOADER_MAGIC; // Set magic number into RAM
        NVIC_SystemReset();             // Perform system reset
        while (1)
            ; // Won't get here
    }
#endif

    // Set watchdog timer to reset. Directs the bootloader to stay in programming mode.
    WDT->CTRLA.bit.ENABLE = 0;

    while (WDT->SYNCBUSY.bit.ENABLE)
        ;
    while (WDT->CTRLA.bit.ENABLE)
        ;

    WDT->CONFIG.bit.WINDOW   = 0;
    WDT->CONFIG.bit.PER      = 0;
    WDT->EWCTRL.bit.EWOFFSET = 0;
    WDT->CTRLA.bit.ENABLE    = 1;

    while (WDT->SYNCBUSY.bit.ENABLE)
        ;
    while (!WDT->CTRLA.bit.ENABLE)
        ;
    while (1)
        ; // Wait on timeout
}

__attribute__((weak)) void mcu_reset(void) {
    NVIC_SystemReset();
}